bobbrazerzkidai.blogg.se - Wood stain colors

WOOD STAIN COLORS HOW TO
WOOD STAIN COLORS SKIN
WOOD STAIN COLORS PROFESSIONAL

If you experience eye watering, headaches, or dizziness during application or drying, increase fresh air or leave the area.

WOOD STAIN COLORS PROFESSIONAL

If properly used, a respirator (NIOSH approved with particulate pre-filter) may offer additional protection and should be used if adequate ventilation cannot be provided obtain professional advice before using. To avoid breathing in dust, vapors, and spray mist, open windows and doors or use other means to ensure fresh air entry during application, drying, sanding, and/ or abrading. Do not breathe dusts, vapor, or spray mist. Sanding, grinding or abrading may release sanding dust, which may be harmful if inhaled and has been shown to cause lung damage or cancer with long term exposure.

WOOD STAIN COLORS SKIN

AVOID CONTACT WITH SKIN AND EYES AND AVOID BREATHING VAPORS, SPRAY MIST AND SANDING DUST. CONTAINS: ETHYLENE GLYCOL AND CRYSTALLINE SILICA. WARNING IRRITANT CAUSES EYE AND SKIN IRRITATION.

WOOD STAIN COLORS HOW TO

Before you start, find out how to protect yourself and your family by contacting the National Lead Information Center at 1-800-424-LEAD or log on to GENERAL INFORMATION Clean up carefully with a HEPA vacuum and a wet mop. Wear a NIOSH-approved respirator to control lead exposure. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. WARNING! If you scrape, sand or remove old paint, you may release lead dust. For recycling or disposal of empty containers, unused product and soiled rags, contact your household refuse collection service.

Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations.

If spilled, contain material and remove with an inert absorbent.

Do not dispose of this product down a drain.

Clean all tools and equipment with warm, soapy water.

Longer dry time may be required in cooler temperatures and higher humidity.

Shelf life under normal conditions is two years unopened.

For oil-based stains pretreat wood with an oil-based pre-stain wood conditioner. Allow Pre-Stain Conditioner to dry for up to 20 minutes before applying Magnolia Home by Joanna Gaines Water-Based Wood Stain. Sand lightly prior to staining to remove grain raise. Allow to penetrate between 5 to 10 minutes and then wipe off any excess with a clean, dry cloth. Use a nylon or nylon/polyester brush or a saturated clean cloth and apply liberally to all areas of the wood surface including edges. A tack cloth can be useful in removing all dust from the surface. Surface must be sanded smooth and remove all dust prior to stain application.

Previously Finished Wood: Strip the surface completely down to bare wood with a paint or varnish remover, making sure all previous finishes are removed.

Sand smooth and remove all dust prior to stain application. Always sand in the direction of the wood grain.

New Wood: Sand the wood thoroughly with medium grit sandpaper and progress to fine grit sand paper (#180 – 220 grit).

All surfaces must be clean, free of dust, oil, grease, wax, polish, glue and all other foreign substances.

Use this product with Magnolia Home by Joanna Gaines Water-Based Interior Wood Stain to enhance the natural beauty of your interior wood surfaces.

Magnolia Home by Joanna Gaines® Pre-Stain Conditioner, along with sanding, is essential in helping prepare interior bare or freshly stripped wood surfaces for an even and consistent color while staining.